Condition: Minor stains, rust on buttons, etc. *Please note that returns and size exchanges are not possible.
Overmitts designed for shooting in arctic-level cold climates
The Alta Arctic Mitt acts as a hand sleeping bag in Arctic temperatures, layered over other Vallerret gloves to provide additional cold protection and keep your hands warm when you need it most.
FlipTech Mitt Cap: Waterproof zipper opens the mitt to expose the inner glove and access the dials.
FlipTech Thumb: Foldable thumb area for access to rear dial
Magnet: Keeps FlipTech open and out of the way for as long as you need it.
Gauntlet Overcuff: Keeps your wrist warm in extremely cold weather.
Wrist strap
Goat leather and DWR laminated soft twill
Nylon taffeta liner: Minimizes snagging with inner gloves, allowing for smooth putting on and taking off.
PolarTec fleece insulation
Additional equipment: glove harness, carabiner
*Inner gloves not included
How to choose a size
Measure around your arm at its widest point with your hand open and relaxed
Measure from the base of your hand to the tip of your middle finger
size
XS
S
M
L
XL
XXL
① Palm circumference (cm)
19 - 20
20 - 21
21 - 22
22 - 23
23 - 25
25 - 27
②Long arm (cm)
16 - 17
17 - 18
18 - 19
19 - 20
20 - 21
21 - 22
Please note: Vallerret gloves are designed for a snug fit to maximize camera feel without sacrificing warmth. If you prefer a looser fit, consider sizing up.
If my measurement is between sizes, which size should I choose?
Often, if your measurements fall between sizes, sizing up is the best option. If your hand size is different or does not fit the measurements on the size chart, we suggest you prioritize the waist measurement. Waist is the most important measurement, and if the glove waist size is too small, you will not be able to wear the glove.
Do I need to size up on my liner gloves?
If you are considering using liner gloves in conjunction with photography gloves, we recommend choosing a liner that is the same size as your photography gloves. We recommend a regular size liner as the liners are thin and designed to fit inside the photography gloves. There are two exceptions to this:
Exception 1: If your measurement is close to the upper limit of your size, say only 1mm from the upper limit, or if you plan to frequently wear liners with your gloves, we recommend going up a size for your photography gloves. Exception 2: If you prefer a fairly loose fit, you may need to size up when adding a liner. Loose gloves may impair your ability to use your equipment and are not recommended for the best possible camera feel.
*For best Fliptech performance when wearing liners and gloves together, choose the liner size that fits your hand snugly.
Secure Payment
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.